Axis Racing

Axis Racing founded in the fall of 2011,is proud to offer you Anything you need for your vehicle!
Need custom stickers and Vinyl? let us know.
Need Automotive performance products? Let us know.
What about custom Clothing? we got that covered too!

Check out our site at
www.Axis-Racing.com
Because it's never really done!

We are on FACEBOOK!
http://www.facebook.com/AxisRacing
www.facebook.com/AxisRacingWi

Instagram users? Check us out.
http://instagram.com/axisracing
Who I Follow
Posts tagged "Chevy"

New goodies from the guy’s at DriveShaft Shop! 

—————————————————————————————

Honda Civic EF / CRX Axle and Hub kit 1000WHP kit Product description. 

The Pro-Level Honda/Acura systems are made to withstand the demands of the highest horsepower drag cars and can currently 

be found in the fastest FWD Honda’s to date. Our Honda/Acura Pro-Level kit is a full drivetrain system that includes both 

axles, featuring our Porsche-style 108mm inner CV joints and bolt-on axle flanges, our signature 33 spline outer CV’s and 

the larger hubs to accommodate them. The most significant part of the Pro-Level System is that we are replacing the standard

 27 spline differential spline with our 40% larger 28 spline transmission spline plug and intermediate bar, for use with the 

DSS Pro-Level 28 spline spool or DSS 28 spline Pro Limited-Slip Differential (DSS Pro-Spool and DSS Pro-LSD sold separately). 

This system includes all the hardware necessary for the install and comes with our full 1-year warranty. And if you already 

have a set of our Level 5.9 axles, they can now be upgraded to Pro-Level axles for much less than purchasing a new set. When

 you’re ready to go for records and challenge the biggest names in FWD drag racing, the DriveShaft Shop Pro-Level drivetrain is the only way to go

This is drag race-only application made to withstand over 1000WHP. 

PART# AC28

This system does not come with ABS Rings. The rings can be installed for an extra 100.00 (not discountable)

Please note: The Level 5.9 hubs are made for 90-93 Integra knuckles. If you are using these for a 88-91 Civic, you must change the knuckles to the 90-93 Integra due to the wheel bearing size.

Part Number: AC28[0]

————————————————————————————————————

2014 Chevy Corvette 1600HP axles Product description

Well it did not take long for anyone to start pushing the Hp of the C7 corvette above breaking the axles, LMR has has some of the fastest

 C7’s to date and its no wonder we partnered up with them and RPM trans to have them test the “New design” they have had the axle s for 

some time checking out several things about them. to be honest there not a whole lot different than the C5/C6 axle, yo know the ones we 

have supplied for about every record breaking Corvette including the World Record Holding Carlyle Racing Atomic Fusion (6:82 and this past

 week end did a 1.08 60ft time) Record broken not parts is what we like to see, why would we take time to test it when there in so many fast

 cars, we wanted to make sure it was 100%. LMR (Late Model Racecraft Tx) took time to ensure it was right also, checking it over and over. 

We has used the new material on the inner CV so the stock seal on the diff can be re-used (older models can be fit with this also) this has

 the larger center bars with billet chromoly cage and races along with some of the best grease on the planet so no need to worry if you road

 racing, this will make it a pleasant experience for both road and track, We realized with the onset of suspension manufacturer’s using large

r shock body’s that the CV needed to be at least as small as the stock one if not smaller so we shortened the flange so any aftermarket one would fit 100% Excellence and ready to ship here from DSS

Part Number: (2) RA5303X5


———————————————————————————————————-

1993-1998 Toyota supra 9” IRS Rear end Product Description

The kit lists for 6999.99 including the Strange “S” series case with Daytona pinion support, your choice of gear ratio along with a Wavetrac

torsion (gear driven) 33 spline differential (DSS Exclusive from them). Also included are the new Pro-series axles with the larger 30 spline

300M center bars, Porsche-type 108mm CV’s with billet cage and races and bolt on outer stub that is ABS capable (customer will re-use his 

rings if needed). The kit will also come with a 4” aluminum shaft with the new CV design that balanced on our high speed balancer and of 

course the 9” housing with brackets and all hardware needed. All you have to add is the oil (We recommend the Lucas 85-140 Non-Synthetic, 

2 quarts only).

(This kit is for the Stock Supra Automatic Trans, we can do this kit with any transmission needed just ask)

Part Number: TO9-A1

———————————————————————————————————-

Scion FRS / Subaru BRZ 600HP Axles Product Description

Many of us have all been anticipating this car for some time. Its a collaboration from two leading Japanese manufacturers 

and it seems that they took some of the best parts from both and made one incredible car. The boxer engine from Subaru,

 the diff is very similar to the 86-92 Supra from what we have gathered, and its RWD. What more could you ask for? We have 

been working with some of the top Drift teams on this set of axles and are happy to announce the new 600HP Level 2 axles. 

Starting with the direct-fit billet chromoly outer CV from our Subaru axles, 300M center bars made from the material we are 

getting out of Sweden, which is by far some of the best material we have used to date. We then went on to make the inner splines

 out of the same material, and used a 108mm Porsche-style inner CV with upgraded chromoly internals to top it off. This set of axles

 was designed with punishment in mind so don’t be easy on them

 is a set (2) RA8600X2 axles

Part Number: RA8600X2

Some new products for you truck owners out there! 

Feel free to contact us regarding any of these products, or anything from the above listed companies and we will be happy to help you.

www.Axis-Racing.com (under construction)
Facebook.com/AxisRacing
Facebook.com/AxisRacingWi
AxisRacing.Tumblr.com 
AxisRacingWi@Gmail.com  
http://axisracing.storenvy.com/
http://instagram.com/axisracing

Mishimoto at Axis Racing.

http://www.mishimoto.com/

www.Axis-Racing.com (under construction)
Facebook.com/AxisRacing
Facebook.com/AxisRacingWi
AxisRacing.Tumblr.com 
AxisRacingWi@Gmail.com  
http://instagram.com/axisracing

AFE Power at Axis Racing.

http://afepower.com/


www.Axis-Racing.com (under construction)
Facebook.com/AxisRacing
Facebook.com/AxisRacingWi
AxisRacing.Tumblr.com 
AxisRacingWi@Gmail.com  
http://instagram.com/axisracing

AEM’s new HIGH FLOW in tank fuel pump.

 AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.


The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.

AEM High Flow In-Tank Fuel Pump Features:

  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In-Tank design
  • Tested to flow 320 lph @ 43 PSI
  • 39mm diameter fits most applications
  • Offset inlet design eases installation
  • Each pump individually tested
  • For gasoline vehicles (pump life may be diminished when used with E85 fuel)
  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

 
More information on the AEM Website:
http://www.aemelectronics.com/high-flow-in-tank-fuel-pump-101/

Contact us at Axis Racing for more information and pricing

www.facebook.com/AxisRacing
AxisRacingWi@Gmail.com 
www.Axis-Racing.com (Under Construction) 

We here at AXIS RACING are going to be doing a GROUP BUY on the DiabloSport In-Tune software. 

If we can get FIVE (5) People the cams will be $365
If we can get TEN (10) People the cams will be $345
If we can get TWENTY (20) people the cams will be $330

Contact us at AxisRacingWi@Gmail.com 

Be sure to ADD us on FACEBOOK!  http://www.facebook.com/AxisRacing

We here at AXIS RACING are running a SALE on all SNOW PERFORMANCE Water/Meth kits! Message us for the best prices! 
This sale is good till FRIDAY AUGUST 24th! Contact us at AxisRacingWi@Gmail.com for the best available pricing.  Be sure to ADD us on FACEBOOK!  http://www.facebook.com/AxisRacing

We here at AXIS RACING are running a SALE on all SNOW PERFORMANCE Water/Meth kits! Message us for the best prices! 

This sale is good till FRIDAY AUGUST 24th! 

Contact us at AxisRacingWi@Gmail.com for the best available pricing.  
Be sure to ADD us on FACEBOOK!  http://www.facebook.com/AxisRacing

We here at AXIS RACING are running a SALE on anything from EXEDY
This sale is good till FRIDAY AUGUST 24th! 

Contact us at AxisRacingWi@Gmail.com for the best available pricing.  
Be sure to ADD us on FACEBOOK!  http://www.facebook.com/AxisRacing

Another AXIS RACING Vinyl tail light overlay kit for the 2008-2012 Chevy Malibu.

We have these for sale for $5 Shipped Via  http://www.facebook.com/AxisRacing

We also offer the same quality product for the turn signals if you would rather have the turn signals done. 

Make sure to LIKE us on FACEBOOK! 
http://www.facebook.com/AxisRacingWi

And ADD us as a friend on FACEBOOK for discounts,specials and giveaways.  
 http://www.facebook.com/AxisRacing